MIG Welders
Plasma Cutters
Welding Helmets
MIG Gun Parts
Plasma Torch Parts
Metal Working Tools
Dent Pulling Equipment
Spot Weld Drill
Measuring Equipment
Spool Gun
Welding Wire
Accessories
Spot Welders - New
Home
EQUIPMENT PLUS, INC.
Toll Free(800) 544-4016
Phone (805) 523-0809
Fax (805) 529-5899

5273 N. Commerce Ave. #5
Moorpark, California 93021

Website Addresses:
danmig.com
equipmentplusweld.com
   
Welding Wire

Welding Wire

 

DAN-MIG offers a variety of wires for every welding need. All wires are of the highest quality available featuring excellent cast and helix properties. The cast and helix are very important qualities that reduce liner wear and keep feeding problems to a minimum. Available in a wide variety of diameters and spool sizes to fit your every welding need.

Steel Wire - All DAN-MIG Steel Welding Wire meets AWS Specification E70S-6. This is the only wire recommended by all auto manufacturers for repairing today’s HSLA steels. A high quality steel wire with a minimum tensile strength of 70,000 psi. Higher silica and manganese content means this wire will flow out better and weld through rust and paint easier. Use .023” dia. for sheet metal to 3/16”, .030” dia. for 16 ga to 3/8” and .035” dia. for 14 ga to 1/2”.

 
Part# Size Material Spool
Diameter
Weight
3001 .023” E70S-6
Steel Wire
2 lbs.  
  3002 .030” E70S-6
Steel Wire
2 lbs.  
  3003 .035” E70S-6
Steel Wire
2 lbs.  
  501 .023” E70S-6
Steel Wire
10 lbs.  
  506 .030” E70S-6
Steel Wire
10 lbs.  
  504 .035” E70S-6
Steel Wire
10 lbs.  
  505 .023” E70S-6
Steel Wire
12” 30 lbs.  
  500 .030” E70S-6
Steel Wire
12” 30 lbs.  
  509 .035” E70S-6
Steel Wire
12” 30 lbs.  


Stainless Steel Wire - All DAN-MIG Stainless Steel Wire is the 308 Alloy. This can be used in both high and low temperature applications and offers excellent resistance to chemical corrosion.

 
Part# Size Material Spool
Diameter
Weight
3007 .023” 308 Alloy
SSWire
2 lbs.  
  3008 .030” 308 Alloy
SSWire
2 lbs.  
  3009 .030” 308 Alloy
SSWire
12 lbs.  
  3010 .035” 308 Alloy
SSWire
12 lbs.  
  3011 .023” 308 Alloy
SSWire
2 lbs.  
  3012 .030” 308 Alloy
SSWire
2 lbs.  


Aluminum Welding Wire - Our Aluminum Wire is the highest tensile strength 5356 alloy wire. This wire also offers better feedability than the softer wires.

 
Part# Size Material Spool
Diameter
Weight
3013 .030” 5356 Alloy
Aluminum Wire
1 lbs.  
  3014 .035” 5356 Alloy
Aluminum Wire
1 lbs.  
  3015 .030” 5356 Alloy
Aluminum Wire
2 lbs.  
  3016 .030” 5356 Alloy
Aluminum Wire
2 lbs.  
  3017 .035” 5356 Alloy
Aluminum Wire
12” 13 lbs.  


Specialty Wires

 
Part# Size Material Spool
Diameter
Weight
3018 .030” Silicon Bronze
Wire
2 lbs.  
  3019 .035” Nickel-Manganese Cast Iron Wire 2 lbs.  


Flux Cored Wire – DAN-MIG offers Flux Cored Wire for those who have the “gasless” wire welders or for anyone working in an area where it is not practical to use shielding gas with hard wire. Meets AWS E71T-GS specification. Great for use outdoors where a strong wind blows the shield gas away.

 
Part# Size Material Spool
Diameter
Weight
3020 .030” Gasless Flux
Cored Wire
2 lbs.  
  3021 .035” Gasless Flux
Cored Wire
2 lbs.  
  3022 .030” Gasless Flux
Cored Wire
10 lbs.  
  3023 .035” Gasless Flux
Cored Wire
10 lbs.  
  3024 .030” Gasless Flux
Cored Wire
2 lbs.  
  3025 .035” Gasless Flux
Cored Wire
2 lbs.  


Hardfacing Wire - Our Flux Cored Hardfacing Wire is a multi purpose hardsurfacing wire that can be used in a wide range of applications to prevent wear or to repair worn parts such as plow shears or harrow teeth. This is a high carbon, chromium alloy with molybdenum which produces a Rockwell “C” hardness of 50. This wire provides unbelievable resistance to severe abrasion, at the same time offering great impact resistance.

 
Part# Size Material Spool
Diameter
Weight
3026 .035” Flux Cored
Hardfacing Wire
10 lbs.  
  3027 .035” Flux Cored
Hardfacing Wire
12” 25 lbs.